First, download the iMito MX1/2 Finless ROM 1.7a firmware from here or from here.
Then follow these steps:
1. Put the Rikomagic MK802IIIS Stick into flash mode.
2. In the ROM kit run the ROM FLash Tool.exe the press 'Flash ROM' button.This procedure will cost 3 minutes so please wait patiently, during recovery/upgrade, don’t remove the USB cable. When the final prompt window appears, then means recovery is successful, pull out USB cable, then total process is finished.
Then follow these steps:
1. Put the Rikomagic MK802IIIS Stick into flash mode.
2. In the ROM kit run the ROM FLash Tool.exe the press 'Flash ROM' button.This procedure will cost 3 minutes so please wait patiently, during recovery/upgrade, don’t remove the USB cable. When the final prompt window appears, then means recovery is successful, pull out USB cable, then total process is finished.
Always
keep in mind that this is not a review, just a first sight of this
firmware. You have to test it more for another details, to see if it
satisfies your needs.
0 comentarii:
Trimiteți un comentariu